Redoran Tile set

[hitnd]

I am working on a house mod, and I'm making a pool with the Redoran tile set after the pool is made I have a big hole where the ceiling should be . I can not find a ceiling piece in the redoran set, can some on please make what I'm after which is (in_r_s_lcenter_01) with out the floor so that the ceiling is all that's left.
I don't have the knowledge to do it.

[blockhead]

Back in the day I ran into this sort of situation all the time and, since I didn't want to make custom models, I got creative with mis-use of existing pieces. It's been so long since I did any modding that I've forgotten a lot.

However, I can offer some half-assed suggestions, purely from memory, which could be wrong.

• Go through the exterior peices. You might find something to plug/fit/fill the gap in your interior.
  
• Take a floor piece. Turn it upside down. Yes, I realize the Redoran ceilings are not flat. What you do next is use some interior balcony peices to edge around the ceiling so that the gaps are filled in. I seem to recall there were balcony pieces in the Redoran small tile set, certainly in the Redoran large. Or maybe exterior wall peices, like the wall around Ald'Ruhn.
  
• Mix tile sets. The tomb/velothi tile set is the most extensive/flexible/complicated one in the game and is the same brownish color as much of the Redoran. MIght find a good fit.
  
• Take tall room center pieces from the Redoran small tile set. Scale them 2x. Line them up so the ceilings more or less lineup. Plug with balconies or whatever as I've mentioned before. Since you scaled the pieces 2x, the floor bits (which you don't want) should be below the floor of the pool, and thus out of sight. Oh: I'm assuming you are using the large tile set for your room. edit: oops, I now see from the name you are not using the large tiles, oops: scratch that idea
  

Hope that helps

[hitnd]

Thanks for your advise using nifscope I was able to remove the floor off of a center piece which is what I wanted